Servo Motor and Servo Drive |
||
Product applications: |
||
Drilling machine、Grinding machine head、Moving equipment、Conveying positioning、Capping machine、CNC internal & external grinder、Metal feeder、 Automatic fabric inspection machine, etc. | ||
Innovated Matchservo Motor |
||
1. | AC servo motor has low noise, minimized EMI and maintenance free. | |
2. | Brushless servo motor is specialized design to have smooth shaft rotation and improved reliability. | |
3. | Servo motors are light weight and compact size, higher power density, higher torque density and higher efficiency than conventional AC motors. | |
4. | A wide range of high-efficiency operation speed 30~3000RPM, suitable for the load changes, speed variation operating conditions are generally advantages that conventional motor can't achieve. | |
Intelligent Servo Drive Controller |
||
1. | The servo driver provides position, speed and torque for three kinds of basic modes operation. | |
2. | Digital I / O output into regulation. | |
3. | Dual system control by torque and speed. | |
4. | Internal servo drive provides 8 segments speed, two-stage acceleration and deceleration control. | |
5. | Internal servo drive 7 segments provides position location, a return HOME mode, eliminate the cumulative amount of error, precise, no need of PC (such as HMI, PLC) control, save costs on PC, and therefore more in line with market demand. | |
6. | Applicable to many commonly used control interfaces such as RS485, standard panel, terminal signal control, PLC and human-peer. | |
7. | Available for all control interfaces, ex. RS 485, direct signal, PLC, HMI. | |
8. | Servo drive provides 24VDC for SENSOR require. | |
9. | Speed rendering and real output DC10V for external control header. | |
10. | Servo drive signals can be output 128 PPR for external control using. | |
11. | Position tolerance on high speed, avoid over-current, over-voltage and motor blocked protection against abnormality occurs. |
Matchservo Motor VS. Induction Motor VS. Brush Motor |
Topic | Matchservo Motor | Induction Motor | DC Brush Motor |
Compact Size, Light Weight | ◎ | X | △ |
Low Rotor Inertia, High Speed Rotation |
◎ | △ | X |
No Rotor Copper Lose | ◎ | X | △ |
High Efficiency | ◎ | △ | △ |
Heat Dissipation | ◎ | △ | X |
No Carbon & Electric Flash | ◎ | ◎ | X |
Low Speed Torque | ◎ | X | △ |
No Brush Maintenance | ◎ | ◎ | X |
Over Load Capability | ◎ | X | △ |
◎ Excellent △ Acceptable X Poor |
MA2 Servo Motor Specifications |
SD2 Servo Drive Specifications |
MA4 Servo Motor Specifications |
SD4 Servo Drive Specifications |
Servo Motor Dimensions |
Servo Drive Dimensions |
T/N curves |
|
120W | 180W | 370W | 750W | 1.5KW | ||
|
MA2-120M/H | MA2-180M/H | MA2-370M/H | MA2-750M/H | MA2-1500M/H | ||
|
M:0.38/H:0.19 | M:0.57/H:0.29 | M:1.18/H:0.59 | M:2.39/H:1.2 | M:4.782.39 | ||
|
M:1.16/H:0.57 | M:1.73/H:0.87 | M:3.53/H:1.77 | M:7.18/H:3.6 | M:14.0/H:7.17 | ||
|
M:0.65/H:0.6 | M:0.9/H:0.8 | M:1.95/H:1.6 | M:3.5/H:3.0 | M:7.6/H:6.5 | ||
|
M:1.17/H:1.8 | M:2.5/H:2.4 | M:5.88/H:4.8 | M:10.2/H:9 | M:22.8/H:18.5 | ||
|
M:3000/H:6000 | ||||||
|
M:0.71/H:0.44 | M:0.71/H:0.44 | M:0.7/H:0.45 | M:0.71/H:0.45 | M:0.67/H:0.44 | ||
|
M:1.11/H:1.12 | M:1.11/H:1.12 | M:1.57/H:1.42 | M:2.59/H:2.26 | M:12.8/H:11.5 | ||
|
M:3.69/H:4.32 | M:3.69/H:4.32 | M:2.54/H:2.74 | M:1.75/H:2.59 | M:1.64/H:2.84 | ||
|
M:2.15/H:3.54 | M:2.15/H:3.54 | M:2.51/H:4.25 | M:3.35/H:4.9 | M:7.77/H:10.73 | ||
|
Class F | ||||||
|
IP65(When an Oil Seal is Used to be Fitted to the Rotating Shaft) | ||||||
|
Fig. A | Fig. B | Fig. C | Fig. D | Fig. E | ||
|
M:2.4/H:2.4 | M:2.4/H:2.4 | M:3.9/H:3.1 | M:4.7/H:4.3 | M:10/H:9.1 |
|
2.2KW | 3.7KW | 5.5KW | 7.5KW | ||
|
MA2-2200M/H | MA2-3700M | MA2-5500M | MA2-7500M | ||
|
M:7.17/H:3.59 | 11.78 | 17.5 | 23.8 | ||
|
M:20.3/H:10.76 | 29.4 | 43.75 | 59.5 | ||
|
M:12/H:10 | 18 | 24.5 | 32.0 | ||
|
M:36/H:30 | 45 | 61.3 | 80 | ||
|
M:3000/H:6000 | |||||
|
M:0.64/H:0.44 | 0.72 | 0.78 | 0.76 | ||
|
M:18.2/H:14.5 | 63.3 | 93.5 | 115 | ||
|
M:1.43/H:2.91 | 4.47 | 2.58 | 2.23 | ||
|
M:8.74/H:10 | 19.7 | 24.8 | 25.3 | ||
|
Class F | |||||
|
IP65(When an Oil Seal is Used to be Fitted to the Rotating Shaft) | |||||
|
Fig. F | Fig. G | Fig. H | Fig. I | ||
|
M:12/H:10.5 | 20 | 25.5 | 29 |
|
120W | 180W | 370W | 750W | 1.5KW | |||
|
SD2-101M/H | SD2-102M/H | SD2-104M/H | SD2-107M/H | SD2-115M/H | |||
|
MA2-120M/H | MA2-180M/H | MA2-370M/H | MA2-750M/H | MA2-1500M/H | |||
|
220V±10% 1Ø | |||||||
|
50/60 | |||||||
|
M:0.65 / H:0.6 | M:0.9 / H:0.8 | M:1.95 / H:1.6 | M:3.5 / H:3.0 | M:7.6 / H:6.5 | |||
|
M:1.7 / H:1.8 | M:2.5 / H:2.4 | M:5.88 / H:4.8 | M:10.2 / H:9.0 | M:22.8 / H:18.5 | |||
|
A,B,Z,HU,HV,HW Open Collector. (A,B Phase= 128PPR) | |||||||
|
0.1~60.0 Sec. | |||||||
|
Load | ± 0.3% Below (0~Rated Torque at Rated Speed) | ||||||
Voltage | ± 0.3% Below (Source Voltage ± 10%at Rated Speed no Load) | |||||||
Temperature | ± 0.3% Below (0~45°C /32~113°F at Rated Speed no Load) | |||||||
|
Sin PWM | |||||||
|
1.Speed Mode 2.Torque Mode 3.Position Mode | |||||||
|
Analog Panel | 1.Vref, Tref ±10V Analog Input 2.Panel VR 0~5V Analog Input | ||||||
Digital Panel | D10~D16 and COM Common, Input Impedance 4.7KΩ to Common | |||||||
|
DOx Open Collector (x=0~3), External
Voltage(48VDC, 10mA below). Magnet Brake Relay Please Set at DO3. |
|||||||
|
Overload, Over Current, Over Voltage, Over Heat Encoder Abnormal, Short Circuit |
|||||||
|
Fig. 1 | Fig. 1 | Fig. 1 | Fig. 1 | Fig. 2 | |||
|
1.1 | 1.1 | 1.1 | 1.1 | 1.3 |
|
2.2KW | 3.7KW | 5.5KW | 7.5KW | |||
|
SD2-122M/H | SD2-337M | SD2-355M | SD2-375M | |||
|
MA2-2200M/H | MA2-3700M | MA2-5500M | MA2-7500M | |||
|
220V±10% 1Ø | 220V±10% 3Ø | |||||
|
50/60 | ||||||
|
M:12 / H:10 | 18 | 24.5 | 32.0 | |||
|
M:36 / H:30 | 45 | 61.3 | 80 | |||
|
A,B,Z,HU,HV,HW Open Collector. (A,B Phase= 128PPR) | ||||||
|
0.1~60.0 Sec. | ||||||
|
Load | ± 0.3% Below (0~Rated Torque at Rated Speed) | |||||
Voltage | ± 0.3% Below (Source Voltage ± 10%at Rated Speed no Load) | ||||||
Temperature | ± 0.3% Below (0~45°C /32~113°F at Rated Speed no Load) | ||||||
|
Sin PWM | ||||||
|
1.Speed Mode 2.Torque Mode 3.Position Mode | ||||||
|
Analog Panel | 1.Vref, Tref ±10V Analog Input 2.Panel VR 0~5V Analog Input | |||||
Digital Panel | D10~D16 and COM Common, Input Impedance 4.7KΩ to Common | ||||||
|
DOx Open Collector (x=0~3), External Voltage(48VDC, 10mA below). Magnet Brake Relay Please Set at DO3. |
||||||
|
Overload, Over Current, Over Voltage, Over Heat Encoder Abnormal, Short Circuit |
||||||
|
Fig. 2 | Fig. 3 | Fig. 3 | Fig. 3 | |||
|
1.3 | 5 | 6 | 6 |
|
750W | 1.5KW | 2.2KW | 3.7KW | 5.5KW | 7.5KW | ||
|
MA4-750M/H | MA4-1500M/H | MA4-2200M/H | MA4-3700M | MA4-5500M | MA4-7500M | ||
|
M:2.39 / H:1.2 | M:4.78 / H:2.39 | M:7.17 / H:3.59 | 11.78 | 17.5 | 23.8 | ||
|
M:7.18 / H:3.6 | M:14/ H:7.17 | M:20.3 / H:10.77 | 29.4 | 43.75 | 59.5 | ||
|
M:2.0 / H:1.9 | M:4.4 / H:3.8 | M:6.9 / H:6.3 | 10 | 14.7 | 19.5 | ||
|
M:6.0 / H:6 | M:13.2 / H:11 | M:20.7 / H:18 | 25 | 36.75 | 48.75 | ||
|
M:3000 / H:6000 | |||||||
|
M:1.27 / H:0.74 |
M:1.18 / H:0.77 |
M:1.16 / H:0.76 | 1.29 | 1.36 | 1.36 | ||
|
M:2.59 / H:2.26 | M:12.8 / H:11.5 | M:18.2 / H:14.5 | 63.3 | 93.5 | 115 | ||
|
M:1.99 / H:2.21 | M:1.60 / H:2.86 | M:1.35 / H:2.06 | 4.08 | 3.20 | 1.81 | ||
|
M:2.84 / H:5.6 | M:7.91 / H:10.75 | M:7.95 / H:13.76 | 19.96 | 27.61 | 29.71 | ||
|
Class F | |||||||
|
IP65 (When an Oil Seal is Used to be Fitted to the Rotating Shaft) | |||||||
|
Fig. D | Fig. E | Fig. F | Fig. G | Fig. H | Fig. I | ||
|
M:4.7 / H:4.4 | M:10 / H:9 | M:12 / H:10.5 | 20 | 25.5 | 29 |
|
750W | 1.5KW | 2.2KW | 3.7KW | 5.5KW | 7.5KW | |||
|
SD4-307M/H | SD4-315M/H | SD4-322M/H | SD4-337M | SD4-355M | SD4-375M | |||
|
MA4-750M/H | MA4-1500M/H | MA4-2200M/H | MA4-3700M | MA4-5500M | MA4-7500M | |||
|
380V±10% 3Ø | ||||||||
|
50/60 | ||||||||
|
M:2.0 / H:1.9 | M:4.4 / H:3.8 | M:6.9 / H:6.3 | 10 | 14.7 | 19.5 | |||
|
M:6.0 / H:6 | M:13.2 / H:11 | M:20.7 / H:18 | 25 | 36.75 | 48.75 | |||
|
A,B,Z,HU,HV,HW Open Collector. (A,B Phase= 128PPR) | ||||||||
|
0.1~60.0 Sec. | ||||||||
|
Load | ± 0.3% Below (0~Rated Torque at Rated Speed) | |||||||
Voltage | ± 0.3% Below (Source Voltage ± 10%at Rated Speed no Load) | ||||||||
Temperature | ± 0.3% Below (0~45°C /32~113°F at Rated Speed no Load) | ||||||||
|
Sin PWM | ||||||||
|
1.Speed Mode 2.Torque Mode 3.Position Mode | ||||||||
|
Analog Panel | 1.Vref, Tref ±10V Analog Input 2.Panel VR 0~5V Analog Input | |||||||
Digital Panel | D10~D16 and COM Common, Input Impedance 4.7KΩ to Common | ||||||||
|
DOx Open Collector (x=0~3), External Voltage(48VDC, 10mA below). Magnet Brake Relay Please Set at DO3. |
||||||||
|
Overload, Over Current, Over Voltage, Over Heat Encoder Abnormal, Short Circuit |
||||||||
|
Fig. 1 | Fig. 2 | Fig. 2 | Fig. 3 | Fig. 3 | Fig. 3 | |||
|
1.1 | 1.3 | 1.3 | 5 | 6 | 6 |
Fig. No. | □P | ØM | ØS | ØN | T | L | LA | LB | LD | LE | AE | AD | Shaft End | |||||
ED | Q | E | ØD | GA | F | |||||||||||||
Fig. A | 90 | 104 | 8.5 | 83 | 2.5 | 175 | 8 | 143 | 57.5 | 66.5 | 68.6 | 77.6 | 25 | 29 | 32 | 12 | 13.5 | 4 |
Fig. B | 14 | 16 | 5 | |||||||||||||||
Fig. C | 190 | 158 | 72.5 | |||||||||||||||
Fig. D | 245 | 213 | 127.5 |
●MA2-1500M/H-MA2-2200M/H
●MA4-1500M/H-MA4-2200M/H
Fig. No. |
□P | ØM | ØS | ØN | T | L | LA | LB | LD | LE | AE | AD | Shaft End | ||||||
ED | Q | E | ØD | GA | F | DH | |||||||||||||
Fig. E | 130 | 145 | 9 | 110 | 3.5 | 261.5 | 12 | 211.5 | 123.5 | 69 | 68.6 | 113.3 | 45 | 50 | 50 | 24 | 27 | 8 | M8 |
Fig. F | 288.5 | 238.5 | 150.5 |
●MA2-3700M-MA2-7500M
●MA4-3700M-MA4-7500M
Fig. No. |
□P | ØM | ØS | ØN | T | L | LA | LB | LC | LD | LE | AB | AC | AD | AE | KK | Shaft End | ||||||
ED | Q | E | ØD | GA | F | DH | |||||||||||||||||
Fig. G | 180 | 200 | 13.5 | 114.3 | 4 | 359.5 | 18 | 280.5 | 261.5 | 107 | 111 | 111 | 116.5 | 147 | 68.6 | 32.8 | 65 | 73 | 79 | 35 | 38 | 10 | M12 |
Fig. H | 454.5 | 341.5 | 322.5 | 168 | 90 | 108.5 | 113 | 42 | 45 | 12 | M16 | ||||||||||||
Fig. I | 484.5 | 371.5 | 352.5 | 198 |
●SD2-101M/H~SD2-107M/H
●SD2-115M/H~SD2-122M/H
●SD4-307M/H~SD4-322M/H
●SD2-337M~SD2-375M
●SD4-337M~SD4-375M