Products

AM Brushless AC Motor and Drive

Brushless AC Motor and AC Drive

Brushless DC Motors with AC Driver

Brushless DC Motor and AC Drive
Product applications:
Internal & External grinder 、Conveying equipment、Coffee roasting equipment、Centrifugal equipment、Polishing equipment、Emulsifying machine、Glass edge grinder、Auto polisher grinder, etc.
Brushless DC Motor
1. Minimize EMI and maintenance free. Low noise.
2. Specialized design to have smooth shaft rotation and improved reliability.
3. Brushless DC motor is light weight and compact size, higher power density, higher torque density and higher efficiency than conventional motors.
4. The structure has an excellent behavior in energy saving during heavy load operation. The high efficiency range is much wider than other motors too.
5. Built-in NTC thermal resistor to prevent over heat problem.
AC Driver
1. Available for all control interfaces, ex. RS 485, direct signal, PLC, HMI.
2. Convenient 220VAC driver power input from 60W. No more 24VDC power supply.
3. Built-in 24VDC mechanical brake control power.
4. Real motor speed display and signal output.
5. Panel control is always enabled with removed control or terminal control or RS485 control. Convenient for system set up or maintenance.
6. Excellent speed stability. Open loop and close loop speed control for selection.
7. With 0~5VDC, 0~10VDC and 4~20mA speed analog input.
8. Over current / heat / voltage, electric motor lock protection.

Brushless IPM Motor VS. Induction Motor VS. Brush Motor
Topic Brushless DC Motor Induction Motor DC Brush Motor
Compact Size, Light Weight ◎ X △
Low Rotor Inertia,
High Speed Rotation		 ◎ △ X
No Rotor Copper Lose ◎ X △
High Efficiency ◎ △ △
Heat Dissipation ◎ △ X
No Carbon & Electric Flash ◎ ◎ X
Low Speed Torque ◎ X △
No Brush Maintenance ◎ ◎ X
Over Load Capability ◎ X △
◎ Excellent △ Acceptable X Poor
Motor & Drive Specifications
Motor Dimensions
Drive Dimensions
T/N Curves

Motor & Drive Specifications
how.gif (10164 ????) how.gif (10164 ????)
Rated Output W
60 90 120 180 250 370
Motor Model No.
AM-60L/M AM-90L/M/H AM-120L/M/H AM-180L/M/H AM-250L/M/H AM-370L/M/H
Drive Model No.
BL2-101 BL2-101 BL2-102 BL2-102 BL2-104 BL2-104
D305
Input Voltage
AC
220V±10%
Input Frequency
Hz
50 / 60
Max. Input Current
A
0.7 1.1 1.5 2.1 2.9 3.6
Motor Phase
3Ø
Rated Torque
kg-cm
2.9/2.0 4.4/2.9/1.5 5.8/3.9/2.0 8.8/5.8/2.9 12.0/8.1/4.0 18.0/12.0/6.0
Rated Speed
RPM
L:2000 / M:3000 / H:6000
Max. Efficiency
%
>80 >80 >80 >80 >80 >80
Max. Output
W
180 220 280 330 450 600
Max. Torque
kg-cm
12/6 15/9/5.5 18/12/8 27/18/10.5 36/24/13 54/36/20
Variable Speed Range
RPM
L:150-2000 M:150-3000 H & CM:300-6000
Speed Regulation
Below 1% (0~Rated Torque at Rated Speed)
Motor Insulation
Class B (130˚C/266˚F)
Max. Working TEMP.
Max. 100˚C/212˚F
Type of Control
Rectangular wave PWM
Speed Command
Digital-panel / analog (Built-in potentiometer / External Potentiometer 2KΩ / 0~5VDC, 0-10VDC, 4-20mA) / RS-485
Protections
A/B fault relay output in over-heat, over-load, over current, motor lock, hall sensor signal fail, motor lock protection.
Motor Enclosure Type
L/M/H:IP40
Motor Fig. No
1 1 L&M:2 H:1 L&M:3 H:2 4 5 4(M/H)
Drive

Fig. No.
BL2 10 10 10 10 10 10
D305 13
Motor Weight (AM) Kg
2.1/2.1 2.4/2.4/2.4 2.6/2.5/2.5 2.9/2.7/2.7 4.0/3.8/3.7 4.5/4.5/4.0
Drive Weight Kg
1.1 1.1 1.1 1.1 1.1 1.1
The varnished copper wire is F class insulation
AM brushless motor has magnet brake option. The AM-60~370 brake torque is 25Kg-cm (21.6in-lb). The AM-750~2200 brake torque is 160 Kg-cm (135 in-lb).
Brushless DC motor has oil seal option.
All of specification subject to change without notice.

[ AM750-AM2200 ]
Rated Output W
750 1000 1500 2200
Motor Model No. AM-750M/H AM-1000M/H AM-1500M/H AM-2200M/H
CM-750L/M/HX CM-1500L/M/HX CM-2200L/M/HX
Drive Model No. BL2-107 BL2-115 BL2-115 BL2-122
Input Voltage AC
220V±10%
Input Frequency Hz
50 / 60
Rated Current A
7.3 10 14 21
Motor Phase 3Ø
Rated Torque

kg-cm
AM:24.4/12.2 AM:32.5/16.2 AM:48.8/24.4 AM:73.2/36.6
CM:36.6/24.4/9.1 CM:73.2/48.8/18.3 CM:109.8/73.2/26.8
Rated Speed RPM
L:2000 / M:3000 / H:6000 / HX:8000
Max. Efficiency %
>85 >85 >85 >85
Max. Output W
1600 2300 3000 4000
Max. Torque

kg-cm
AM:48.8/24.4 AM:65/32.4 AM:97.61/48.8 AM:146.4/73.2
CM:73.2/48.8/18.2 CM:146.4/97.6/36.6 CM:210/146.4/53.6
Variable Speed Range RPM
L:150-2000 M:150-3000 H & CM:300-6000
Speed Regulation Below 1% (0~Rated Torque at Rated Speed)
Motor Insulation Class B (130˚C/266˚F)
Max. Working TEMP. Max. 100˚C/212˚F
Type of Control Rectangular wave PWM
Speed Command Digital-panel / analog (Built-in potentiometer / External Potentiometer 2KΩ / 0~5VDC, 0-10VDC, 4-20mA) / RS-485
Protections A/B fault relay output in over-heat, over-load, over current, motor lock, hall sensor signal fail, motor lock protection.
Motor Enclosure Type L/M:IP54 H:IP40
Motor

Fig. No.
AM:6 AM:7 AM:8 AM:9/8
CM:A/D CM:B/E CM:C/F
Drive   Fig. No.
10 11 11 11
Motor Weight (AM)

Kg
AM:8.0/7.8 9.4/8.7 AM:11.0/9.7 AM:13.2/16.5
CM:11/11/14.2 CM:14/14/15.3 CM:15.6/15.6/16.5
Drive Weight Kg
1.1 1.3 1.3 1.3
The varnished copper wire is F class insulation
AM brushless motor has magnet brake option. The AM-60~370 brake torque is 25Kg-cm (21.6in-lb). The AM-750~2200 brake torque is 160 Kg-cm (135 in-lb).
Brushless DC motor has oil seal option.
All of specification subject to change without notice.


Rated Output W
370 750 1000 1500 2200
Motor Model No. AM-370L/M/H AM-750M/H AM-1000M/H AM-1500M/H AM-2200M/H
CM-750L/M/HX
CM-1500L/M/HX
CM-2200L/M/HX
Drive Model No. BL4-304 BL4-307 BL4-315 BL4-315 BL4-322
Input Voltage AC
380/440 VAC ±10% 3Ø
Input Frequency Hz
50 / 60
Rated Current A
1.4 2.2 3.0 3.5 5.0
Motor Phase 3Ø
Rated Torque

kg-cm
AM:18.0/12.0/6.0 AM:24.4/12.2 AM:32.5/16.2 AM:48.8/24.4 AM:73.2/36.6
CM:36.6/24.4/9.1 CM:73.2/48.8/18.3 CM:109.8/73.2/26.8
Rated Speed RPM
L:2000 / M:3000 / H:6000 / HX:8000
Max. Efficiency %
>80 >85 >85 >85 >85
Max. Output (440 VAC) W
600 1600 2300 3000 4000
Max. Torque

kg-cm
AM:54/36/20 AM:48.8/24.4 AM:65/32.4 AM:97.6/48.8 AM:146.4/73.2
CM:73.2/48.8/18.2 CM:146.4/97.6/36.6 CM:210/146.4/53.6
Variable Speed Range RPM
L:150~2000 / M:150~3000 / H :300~6000 / HX:300~8000
Speed Regulation RPM
Below 1% (0~Rated Torque at Rated Speed)
Motor Insulation Class B (130°C/266°F)
Max. Working TEMP. Max. 100°C/212°F
Type of Control Rectangular wave PWM
Speed Command Digital-panel / analog (Built-in potentiometer / External Potentiometer 2KΩ / 0~5VDC, 0-10VDC, 4-20mA) / RS-485
Protections A/B fault relay output in over-heat, over-load, over current, motor lock, hall sensor signal fail, motor lock protection.
Motor Enclosure Type L/M/H: IP40 L/M/H: IP54 H/HX:IP40
Motor

Fig. No.
5 4(M/H) AM:6 AM:7 AM:8 AM:9/8
CM:A/A/D CM:B/B/E CM:C/C/F
Drive   Fig. No.
10 11 11 11 11
Motor Weight

Kg
AM:4.5/4.5/4.0 AM:8.0/7.8 AM:9.4/8.7 AM:11.0/9.7 AM:13.2/16.5
CM:11/11/14.2 CM:14/14/15.3 CM:15.6/15.6/16.5
Drive Weight Kg
1.1 1.3 1.3 1.3 1.3
The varnished copper wire is F class insulation
AM brushless motor has magnet brake option. The AM-60~370 brake torque is 25Kg-cm (21.6in-lb). The AM-750~2200 brake torque is 160 Kg-cm (135 in-lb).
Brushless DC motor has oil seal option.
All of specification subject to change without notice.

Motor Dimensions

Unit: mm

Fig. No.

 □P ØM ØS ØN T LA LB L1 L2 AD A B1 B2 Shaft End
ED Q E ØD GA F
1 90 104 8.5 83 2.5 8 99.5 127.5 160.5 109.8 28.5 61 33 20 25 28 12 13.5 4
2 114.5 146.5 179.5 25 29 32
3 14 16 5
4 169.5 201.5 234.5
5 184.5 216.5 249.5


Unit: mm

Fig. No. □P ØM ØS ØN T LA LB L1 L2 B1 B2 AD AE LD Shaft End
ED Q E ØD GA F DH
6 130 145 9 110 3.5 12 178 218 252.3 117 34.3 165.5 146 63 35 40 40 19 21.5 6 M6
7 195 245 279.3 80 45 50 50 24 27 8 M8
8 212 262 296.3 97
9 232 282 316.3 117



Unit: mm

Fig. No.

□P

 ØM ØS ØN T LA LB L AC AD AE LD Shaft End
ED Q E ØD GA F DH
A 175 165 12 130 3.5 13 205 245 142 186 166 67 35 40 40 19 21.5 6 M6
B 239 289 101 45 50 50 24 27 8 M8
C 259 309 121
D 287 327 144 67 35 40 40 19 21.5 6 M6
E 337 45 50 50 24 27 8 M

Drive Dimensions










T/N Curves





Loading...
Loading...
Contact Us